Forums Laser Resources Laser Physics Related Literature Hydrokinetics Article

  • This topic is empty.
Viewing 15 posts - 61 through 75 (of 103 total)
  • Author
    Posts
  • #9495 Reply

    lagunabb
    Spectator

    Ron,

    Your way of looking at confinement is correct, less energy loss and more focused shock.  Another way to look at the glass capillary is that it is slightly flexible (it bulges) when pressure is placed on it from the inside.  The compressiblity of quartz depending on how they made it is 2X10^-6/psi +/- 25%.  Now imagine a capillary made of water, the compressibility of water is about 3X10^-6/psi.  So water is slightly more compressible than quartz.  For practical purposes, water is pretty incompressible just like quartz.  That’s why I mentioned the thought experiment with water contained in water.   The water in water is in fact just a water film.  Do shocks happen with water films?  I believe the Fried et al Water Augmentation results with water film + laser show that it is happening.  I think there is a legitimate debate between the effectiveness of water droplets (Waterlase) vs (DELight) water films.  I just told Al that debate would have a flavor of “taste great, less filling!” to it.  As for the Opus contact mode, I am staying away from it as a patient.

    Regarding the procelain etching, a shock wave mechanism means that cutting happens if the pressure of the shock exceeds the compressive yield strength of the material being cut.  I have been trying to look up compressive strengths of enamel and porcelain with no luck.   Do you know where I can find data like that?

    (Edited by lagunabb at 9:12 pm on Sep. 22, 2003)

    #9557 Reply

    Swpmn
    Spectator

    According to my text by Ralph Phillips, Skinner’s Science of Dental Materials, 8th Edition, 1982, W.B. Saunders:

    Compressive Strength(MPa)
    Enamel 261-288
    Dentin 232-305
    Porcelain 331

    Al

    #9466 Reply

    Anonymous
    Guest
    QUOTE
    Quote: from lagunabb on 11:39 pm on Sep. 22, 2003
     I have been trying to look up compressive strengths of enamel and porcelain with no luck.   Do you know where I can find data like that?
    (Edited by lagunabb at 9:12 pm on Sep. 22, 2003)

    Porcelains                                     (psi x 1000) (MPa)

    Feldspathic               Trubyte
                                  Bioform 2100      21.6**** 149****    
    Fused to metal          Ceramco Opaque 21.7****150****

    Leone, E. F., and Fairhurst, C. W. Bond strength and mechanical properties of dental porcelain enamels. J. Prosthet. Dent., 18(2):155-159, 1967

    Tooth structures
    Dentin                                        43.1     297        
    Enamel (cusp)                              55.7     384

    Craig, R. G., and Peyton, F. A. Elastic and mechanical properties of human dentin. J. Dent. Res., 37(4):710-718, 1958
    Craig, R. G., Peyton, F. A., and Johnson, D. W. Compressive properties of enamel, dental cements, and gold. J. Dent. Res., 40(5):936-945, l961.  

    http://www.lib.umich.edu/dentlib/Dental_tables/Ultcompstr.html

    #9537 Reply

    Glenn van As
    Spectator

    Seems to me if the primary action of lasers is HK that it should cut porcelain…….

    What is amalgam, what is a metal matrix………

    Do I sound like a broken record??

    Glenn

    #9525 Reply

    lagunabb
    Spectator

    Ron,

    I am not sure if I am reading your table correctly.  I see ceramics lower in compressive strength compared to enamel (cusp).  Is that right?  Al’s reference seems directionally correct.

    Glenn,  I don’t know for amalgam.  Has anyone purposely sacrificed their laser and looked at the amalgam crater afterwards?  

    (Edited by lagunabb at 7:41 am on Sep. 24, 2003)

    I just checked the umich link and the nice compilation.  So amalgam > enamel=resins > procelain (ceramics) in compressive strength?  There may be a consistency problem since different researchers may have slightly different procedures and equipment.  Thanks for the link.

    (Edited by lagunabb at 7:45 am on Sep. 24, 2003)

    I just sent Dentsply a request for yield strength, tensile strength and compressive strength data. I will post if they provide it.

    (Edited by lagunabb at 10:54 am on Sep. 24, 2003)

    #9540 Reply

    Glenn van As
    Spectator

    Some lasers dont have a problem with Amalgam or metal. THe tips get discolored but that is it.

    Glenn

    #9552 Reply

    Robert Gregg DDS
    Spectator

    Hi All,

    I’m back from a week at the AAP meeting and training this past weekend, where applied clinical science was the order of the days.  What a breath of fresh air is was in San Francisco under those conditions!!

    Upon my return to the Forum, I find it remains as muggy and stuffy as when I left it.

    This ongoing “debate” is not productive.

    Eric Bornsteins has established his credentials in my view as both a trained scientist, and a practicing clinician.

    Shrill, repetative, arguementative, and tactics to confuse for personal self interest and not for the use and understanding of the clinical dentists on the forum are not productive or helpful.

    My view on that is we have a heckler, a disrupter, a shill for a technology not proven, but desparately wants credibility and acceptance.  And in trying to do so, attacks those he disagrees with personal invectives.

    And there is no shame from the interloper when his allegations and accusations are demonstrably refuted.

    As I have said in posts before, it is NOT for the skeptic to disprove the theory, it is for the advocate to prove that the theory works as claimed.  Anything less from an advocate is immature.

    Why haven’t the advocates of the New Theory advanced more of the HKS “science” over the past 5 years themselves?  That is their responsibility, not anyone else’s.

    When Del and I advanced our laser bone regeneration theory, we didn’t whine when others criticized us for not having the research.  We agreed with them and asked them to help us.  And they did, and they are continuing to do so in ever increasing numbers!

    Now we have science and histology from research conducted by respected university periodontists, and we are appropriately vindicated that we stuck through the skeptics criticizm for the past 10 years and our New Treatment Theory has prevailed.

    That’s different from what we are seeing here.  We are witnessing an undignified defense of a New Theory that the very inventors and patent holders will not sponsor research to scrutinize and test the New Theory further.  They are fully aware that the results of independent investigations will cast doubt on their “invention”–as in Dan Fried’s research.  And when that happens, there goes the uniqueness of their product.

    I’ll be back to post some clinical case photos elsewhere in this Forum, as this debate is over and the New Theory is as yet unproven, unestablished, and unaccepted by credible clinicians or scientists, not to mention, some of the patent holders……

    Bob

    #9511 Reply

    lagunabb
    Spectator

    Dr Gregg:

    You are having one of your holier than thou moments. I will continue this over in the laser marketing thread where it belongs.

    #9528 Reply

    lagunabb
    Spectator

    Dr Bornstein:

    I emailed the Fried et al paper. It’s 3MB to preserve the quality of the pictures. Let me know if you don’t get it.

    #9485 Reply

    ericbornstein
    Spectator

    Ray:

    Received the e-mail. Will try and read the paper tonight.

    Eric Bornstein DMD

    #9512 Reply

    lagunabb
    Spectator

    Dr Gregg:

    Below is my answer to your question which seems to be puzzling you and I presume everybody else reading the threads.

    Your question:
    “Ray,
    There you go again…………”It’s one of those statements that makes you question……”rock.gif What other statements cause you to question my credibility, Ray?”

    You seemed genuinely puzzled. However, I believe I subtly discussed this scientific/marketing issue with you on dental town soon after we met to discussed lasers a year ago.

    Since you have now decided to attack my motives and biases on a personal level, the readers of the forum deserves a hearing of why I question of your criticisms of competitor(s), whether scientific or marketing based criticism. As I have made clear before, my motive is simple, to make money. There is a public interest aspect in that I would love to see more wide spread use of lasers in dentistry because I believe the result will be better dental health for my family and the public. I do consider public interest as I refuse to invest in tobacco companies for example.

    Approximately one year ago, you gave me a face-to-face presentation about your laser system and your laser business. You also gave me a venture-capital investor packet which included slides and papers from your presentation and marketing brochures. Not being a dentist and not well researched in soft tissue procedures, I understood some of the slides with your explanations and did not understand many. I believe the point that you were trying to get across to me and other potential investors before and after me was that your system offers a major improvement in clinical results compared to conventional methods with a very important clinical benefit which is the regeneration of bone and attachment. In your presentation you placed particular emphasis on bone re-growth and showed many x-rays illustrating your point. Because of my low level of understanding when it comes to interpreting dental x-rays, you emphasized your point by showing an easy to understand slide that you made by “subtraction” x-ray showing 3D bone regeneration around a treated tooth. Your presentation is encompass the results featured in your Dentistry Today article which you have on your web site. I was impressed by your dedication to the profession and your pursuit of providing state-of-the-art dentistry to the soft tissue market. The link to your article is here:

    http://www.millenniumdental.com/research/may-02.html

    My impression from the meeting and packet that you provided is that your Dentistry Today article is a principal piece of the clinical science behind your marketing. However, you have a glaring scientific fly in your ointment that bothers me to this day, and I subtly raised my concerns with you on Dental Town a week or so after we met and I reviewed your materials. You acknowledged in a Dental Town reply that there were software problems with the subtraction x-ray program but essentially stuck to your claims that the subtraction results were useful for showing bone growth in 3D. I will admit that my attitude a year ago of “let sleeping dog lie” has morphed into anger over time with each of your verbose criticisms of competitor(s) for not being scientific about their marketing claims. Your Figure 4 subtraction x-ray results are invalid, wrong, fiction, or as Dr. Bornstein may put it ____hit. Here is what a real subtraction x-ray looks like:

    http://www.alphatecltd.com/dentistry/radiography.html (see Figure 2)

    Furthermore, it is not scientifically possible to extract meaningful 3D interpretations from subtracting two 2D x-rays from the same angle as you had claimed in your presentation to me and apparently to others. All it would show are differences in density from that angle.

    As potential VC investors, this raises some troubling questions for us:
    1.He was not aware of the problem and will retract results and publish errata explaining error. (the best outcome and the outcome I was hoping for)
    2.He was aware of the problem and did not realize the magnitude of the error. He will retract results and publish errata explaining error upon realizing error is significant. (still OK but not as good as 1.)
    3.He was aware of the problem and publishes those results anyway.
    4.number 3 plus he uses it embellish presentations to interested parties.

    It occurred to me in time that number 4 happened in this case. I am not happy about that and I wish that I had reached some other conclusion. It’s Ok to criticize others out of genuine concerns or if you have hard data contrary to claims. In the case of your posts attacking Biolase, it is very hard for me to distinguish what is genuine and what is not genuine. My minimal conclusion is that your scientific opinions are to be taken with a large grain of salt. Again, I admit that my attitude a year ago of “let sleeping dog lie” has morphed into anger over time with each of your verbose criticisms of others for not being scientific about their marketing claims.

    Below I have attached my original draft (posted to Dental Town last year) to you cautioning you about your subtraction X-ray results:

    >>>>>>>>>>>>>>>>>>>>>>&g
    t;>>>>>>>>>
    Bob and Lasersmiledr –

    Bob – thanks for the THICK packet of papers, you expect me to read them right? Anyway, goes great with cabernet and the world series and not necessarily in that order. Please provide a Tom Clancy novel next time so I can stay awake for the game.

    I believe lasersmiledr is referring to Bob’s “Laser Periodontal Therapy for Bone Regeneration” paper and accompanying slides and figures presented in the May 02 Dentistry Today. Figure 4 is where you show the subtraction radiograph (difference between x-ray images shown in figures 2 and 3). Link to Bob’s report <a href="http://www.millenniumdental.com/research/may-02.html

    Something” target=”_blank”>http://www.millenniumdental.com/research/may-02.html

    Something bothered me about that slide when I first saw it and I reviewed it again just now since Lasersmiledr’s posts piqued my intellectual curiosity about Figure 4. (Must be my past experience at looking time lapsed CT’s and time lapsed differences haunting me.) In a time lapsed difference x-ray image, differences in portions of the system that have not been altered (in this case teeth, crown etc…) should cancel out to the residual (noise) level. The real significant differences will stand out as either a negative signal or positive signal depending on changes in density (bone in this case).

    Here is an example from dentistry (GE medical site has examples for body). See bottom figures. Bottom right is the difference image. http://www.alphatecltd.com/dentistry/radiography.html As you can see, the unchanged portion of the teeth structure is essentially grey which represents noise and the differences (increases in bone density) where significant stands out. In Bob’s figure 4, there are differences everywhere including where things were not supposed to have changed. There must have been some mix up in the way the image was retrieved or process. My speculation is that Figure 4 is the difference of Figure 3 and a slightly rotated (or offset) Figure 3, (thus the creation of shadows and preservation of texture). In any event, it looks like the input data, the algorithm, the processing and subtraction radiograph needs to be rechecked and re-computed.

    BTW — Bob you better hire lasersmiledr for VP of PR before your competitors do.

    >>>>>>>>>>>>>>>>>>>>>>&g
    t;>>>>>>>

    #9533 Reply

    Albodmd
    Spectator
    QUOTE
    Quote: from Glenn van As on 10:02 pm on Sep. 24, 2003
    Some lasers dont have a problem with Amalgam or metal.  THe tips get discolored but that is it.

    Glenn

    Glenn,
    Glad to know I’m not the only one to get those discolored tips. What have you found is the best way to clean them?
    Regards,
    Al B

    #9474 Reply

    ericbornstein
    Spectator

    Ray:

    I got a chance to read the study. Do you have specific questions, or points of concern with it?

    If so, please list them and I will take a critical look.

    Eric Bornstein DMD

    #9545 Reply

    Robert Gregg DDS
    Spectator

    Dear Ray,

    I’m sorry your anger has gotten the better of you.  mad.gif  But I understand your reasons for being angry.:angry:  And it’s clearly not about my “credibility” regarding the HKS website animation anymore.:o

    When I got angry with you after you first public disparagement of me, I first called you out of courtesy to discuss it with you and I resisted the impulse to go off on you in public.  I even made a post in an attempt to “take the conversation in another direction”.  Yet, you have never afforded me the same courtesies when you got angry with me and came after me a second, then a third, then a fourth time in public postings.:confused:

    I called you originally because I was impressed with your scientific inquiry in the subject of laser dentistry.:cheesy:   You appeared to want to know the truth about the industry, the technology, the clinical utility and practicality of lasers.  I invited you to MDT offices to meet with me–full leg cast and all–to share with you some perspectives from a veteran of this industry, and gain some insights to your interest in the field.  I was hoping you were an investor who might be different from the others I have dealt with in years gone by, and have an interest beyond greed alone.  I was hoping you might want to help make a difference, while making some money.  Unfortunately, I was mistaken.:(

    You subsequently challenged (and become angry) over one digitally compared radiograph and found it not to your liking.  You then assign all sorts of possibilities except the explanation I gave you.  I honestly think it is an inability to trust other people’s representations that leads you to suspect those who are trustworthy, yet invest (quite literally) in those people and things that IF they are true (but are yet unproven)–it would be wonderous.  But I digress……..

    I have acknowledged that there have been reported problems with this software (from the researchers), that I did not do this “comparison”, and felt it still represented the 3-D bone density increases we are trying to get doctors to appreciate, and is consistent with the results and images that you do not object to.  Other comparative radiographs we have published show similar density profiles, and percent bone density increases, if not in the “grey scale” format of the x-ray you dislike.  So where’s the real “beef”, Ray?

    In any event, Dentistry Today is only a small part of the evidence we present to scientifically support our work.

    Here’s some peer reviewed science that we sponsored, which I have posted and you have not objected to:

    1.  Peer Reviewed, retrospective, blinded, multi-centered, private practice clinical study

    http://spie.org/scripts/abstract.pl?bibcode=2002SPIE%2e4610%2e%2e%2e49H&page=1&qs=spie

    Study of 65 patients and over 1900 probing sites showed that laser periodontal therapy using a specific modality called “LANAP” for “Laser Ablation New Attachment Procedure” was reproducible in reducing 90% of pockets without any recession in ONE treatment by a minimum of 50% regardless of pocket depth as such:

    > 4mm – 2.2mm reduction
    > 6mm – 3.1mm reduction
    > 8mm – 4.5mm reduction

    Recently published university research with human histology shows we are getting regeneration following our LPT protocol with the PerioLase–just like we demonstrate in those digital x-rays.

    I have known about these histology results long before I ever posted on Dental Town or this Forum was operational……..

    Published abstract from the 2003 IADR meeting in Sweeden this June.

    Results from a Controlled, Prospective, Blinded, Human Histologcal en blocin an indepndent university study demonstrating that using proper technique, proper “light dosemitry” with a pulsed Nd:YAG can be associated with new attachent (new bone, new cemetum, new functional periodontal ligament in periodontal disease in humans.

    This study helps to validate the safe and effective clinical use that pulsed Nd:YAG clinicians have been claiming for use in the periodontal pocket for over 13 years, where no damage to root surface or pulp has been observed.

    1735 Laser-assisted Periodontal Regeneration in Humans

    R.A. YUKNA, G.H. EVANS, S. VASTARDIS, and R.F. CARR, Louisiana State University, New Orlreans, USA

    Objective: The Laser Assisted New Attachment Procedure (LANAP) has been advocated for the sulcular debridement of periodontal pockets with the goal of obtaining new attachment. Clinical case reports have reported favorable clinical results, but there is no human histologic proof of regeneration.

    Methods: 3 patients with 2 single-rooted teeth with moderate-advanced chronic periodontitis associated with subgingival calculus deposits were enrolled. Occlusal adjustment and direct bond extracoronal splinting was performed. Under local anesthesia, a 1/4 round bur notch was placed at the apical extent of calculus as carefully as possible. One of each pair of teeth received Nd:YAG laser treatment of the inner pocket wall to remove the pocket epithelium (laser settings were 3 watts, 150 pulses/second, 10 hz). Both teeth were then aggressively scaled/root planed with an ultrasonic scaler. The pocket of the test tooth was lased again to coagulate any blood present and to form a pocket seal. Triple antibiotic ointment and a light cured dressing was placed. Control teeth received all of the above except the laser treatment. The patients were seen every 10 days for the first month, then at 2 and 3 months, at which time the treated teeth were removed en bloc for histologic processing. Decalcified step serial sections were stained with H & E.

    Results: 2 of the 3 LANAP treated specimens showed new cementum, new bone, and new periodontal ligament in and coronal to the notch. The control teeth had a long junctional epithelium with no evidence of regeneration. There was no evidence of any adverse pulpal or tooth surface changes in either specimen.

    Conclusions: This report supports the proof of principle that LANAP can be associated with periodontal regeneration on a diseased root surface in humans.

    Supported by Millennium Dental Technologies and the Louisiana Periodontics Support Fund.

    Seq #178 – Therapeutic Intervention – Adjunctive Treatment
    11:00 AM-12:15 PM, Friday, 27 June 2003 Svenska Massan Exhibition Hall B

    http://iadr.confex.com/iadr/2003Goteborg/techprogram/abstract_34208.htm

    Our histological research supports our new treatment theory, and the images we published in Dentistry Today–that according to the PI of the LSU study.

    Furthermore, we are investing in and preparing a multi-centered university-based, prospective, blinded controlled clinical trial of our methodology compared to “gold standard” periodontal treatment methods.

    That’s what I mean about science and our commitment to credible research.  

    Is your company investing in any research to validate the HKS hypothesis, or any such clinical claims being made?  Not last I spoke to their reps about it–like at the AAP meeting in San Francisco.  None is now underway, and none is even in the plans.

    That’s the point of credible commitment to science that separates MDT and what I advocate, and what you seem to be so accepting of, for the simple motive that you have acknowledged–to make money.

    My motives start with my patients’ needs and outcomes first, not profit at their expense.

    Your reaction to those who challenge your beliefs and the investments you make is so identical to the reactions I have dealt with from other manufacturers over the years when their “sacred cow” was not appreciated–they attack the messangers, and refuse to deal with the message.

    Good luck in your next venture……in….whatever.  I’ll still be here treating patients, contributing to the clinical and basic science research as it pertains to optimal patient treatments and parameters of care using lasers.

    And NO, you can’t invest in our company.  I told you before we want to keep it private so we are not beholding to Venture Capitalists who wants to turn, churn, and burn the company for all that it’s worth.:biggrin:

    Yours in scientific and clinical laser dentistry,

    Robert H. Gregg, DDS

    #9513 Reply

    lagunabb
    Spectator

    Dr Gregg:

    I am unfortunately blessed with a science background and had the experience of going through peer reviews and editorial review boards.  If not for that experience, I would probably have lower standards when it comes to reviewing results especially when they are presented as hard data and we would invest and live blissfully hereafter.  However, hard data is hard data, no manipulation, no hocus pocus.  My beef is that you presented to me (and I assume others) something as data to be trusted when you knew there were problems with that data.  Am I now suppose to be able to draw the line where your data can be trusted or not?  What is data and what is not?

    You have a nice system from what I have read but does that make it OK to knowingly present erroneous data once in a while.  You complain about the AAP position paper (and I personally questioned the hardness of their position as well last year) but maybe the author has a point if he arrived at the same value judgement as I did regarding what you find as  acceptable science and what is not.

    Finally, in an emerging market like dental lasers, I expect that the a company in a clear leadership position will get many arrows in its back.  It is attack marketing and marketing by confusion by competitors that want to catch up.  (See Michael Potter’s Competitive Strategy)  There is some positive marketing happening especially when clinical cases and pictures are posted alternating with healthy doses of negative marketing.   And I believe positive marketing is the way to any company’s success.  

    Lastly, thanks for trying to save me from my greed last year by questioning my investment in Biolase last year.  I really appreciate it.  Your criticisms, some of which were valid, made me do more research.  Good luck with your venture and I bid you a fond farewell.

    (Edited by lagunabb at 6:14 pm on Sep. 30, 2003)

Viewing 15 posts - 61 through 75 (of 103 total)
Reply To: Reply #9551 in Hydrokinetics Article
Your information: