Forums Other Lasers Misc. Laser Forum Microscope tips.

  • This topic is empty.
Viewing 15 posts - 46 through 60 (of 74 total)
  • Author
    Posts
  • #5229 Reply

    Congrats Ron….sorry to hear about the bad Global experience. That is not common in my experience , but it is what it is.

    If you do want to make a comment , try reaching Mr. Jerry Garbutt who is the president of Global at jgarbutt@globalsurgical.com

    Its amazing to see what you can at high mag with the scope. I just did a redo on a mucocoele this morning and oh my god, to watch mucous excreting out on the incision and to see how deep I had to go….its frightening sometimes.

    Anyways thanks for the kudos and there are multiple levels of information on the DVD. Early on something makes sense that is basic but with time you will find that information that you didnt comprehend early on makes sense.

    If you need any other information please dont hesitate to contact me. Heck if Kimmel can learn to use a scope anyone can!!

    (Just kidding)

    Glenn

    #5199 Reply

    dkimmel
    Spectator

    Glenn I gave it a try as you suggested. It seems my aim is a bit better. It is just that the even the lower maginification is just too much. Not sure why you need such high mag. smile.gif
    DSCN1665w.jpg

    #5207 Reply

    jaynelson
    Spectator

    I’m just glad you didn’t show the photo through the scope!

    Jay Nelson
    Lutz, FL

    #5248 Reply

    Graeme Milicich
    Spectator

    Now that view would give your ego a great boost!!!

    #5238 Reply

    Glenn van As
    Spectator

    David , the Seiler scope has such a bad lighting system I am surprised you didnt get your hands all wet. I was going to take a picture myself with my Global scope in a similar fashion……..

    But gosh the water was cold, and deep too!!

    GRIN

    You really make me laugh sometimes…….

    Good one

    Glenn

    #5222 Reply

    whitertth
    Spectator

    Gavid,
    I assume u have that on 13x right? One question, what do u do in the bedroom? Do u have it on a ceiling mount or a wall mount…Just curious…..

    #5243 Reply

    Glenn van As
    Spectator

    Ron , he actually has mulitple mounts and just carries the optics around the house. He has one in the workshop to get the splinters out of his ……..

    Another in the library to read the fineprints in his laser warrantee contracts.

    One in the kitchen to accurately measure for those christmas recipes…

    We saw in the bathroom………shameless.

    Now the bedroom, well that one had to be a ceiling mount because the trampoline on the floor , the mirrors on the walls and ceilings and the trapeze…..well you know how crowded our operatories are………

    Take care

    Happy holidays to all………

    Glenn

    #5189 Reply

    Anonymous
    Guest

    How about some photography help?
    Here are pictures w/ G5

    scope2.jpg

    20x.jpg

    Is this what I should expect? or are there settings to get the target to fill the whole screen and not have to cut and paste to a new picture?

    Adapter said to use smallest F stop but not much else.

    Any suggestions?

    Thanks

    #5239 Reply

    Glenn van As
    Spectator

    What scope and what setting were you using.

    What ISO, what adapter, what light bulb in the scope.

    THere is a TON of information to taking great photos. Its an art in itself…….

    There is alot of good information on <a href="http://www.xmount.com

    Glenn” target=”_blank”>http://www.xmount.com

    Glenn

    #5211 Reply

    smluger
    Spectator

    Ron,

    One thing I would recommend without being there is to try seting your camera to infinty. The other is to  use the Zoom on your camera to match what you are seeing on the monitor to what you are seeing on your led screen. I would also open up my f-stops to a smaller number. Digital-still cameras require much more light than video cameras which require low lux.
    You have a dual purpose beam-splitter which has an 80-20 port on one side for the video camera where 80% goes to your eyes and 20 % goes to the video camera. On the other side of your beamsplitter, there is another port with a 50/50 split which gives more light to the G-5 Digital Camera. That is the side to mount your digital camera on. You might have this reversed.

    I hope this gets you on your way.

    (Edited by smluger at 7:28 am on Dec. 25, 2004)

    #5209 Reply

    smluger
    Spectator

    ” You have to see what to treat, before you can treat what you see.”

    One thing I would recommend without being there is to try setting your camera to infinty. The other is to  use the Zoom on your camera to match what you are seeing on the monitor to what you are seeing on your led screen. I would also open up my f-stops to a smaller number. Digital-still cameras require much more light than video cameras which require low lux.
    You have a dual purpose beam-splitter which has an 80-20 port on one side for the video camera where 80% goes to your eyes and 20 % goes to the video camera. On the other side of your beamsplitter, there is another port with a 50/50 split which gives more light to the G-5 Digital Camera. That is the side to mount your digital camera on. You might have this reversed.

    I hope this gets you on your way.

    (Edited by smluger at 7:28 am on Dec. 25, 2004)
    [/quote]

    (Edited by smluger at 7:33 am on Dec. 25, 2004)

    #5183 Reply

    Anonymous
    Guest

    Getting a little closer on the images-

    ae1.jpg

    ae2.jpg

    ae3.jpg

    #5186 Reply

    Anonymous
    Guest

    Snowed out today, so time to play!

    ndendo.jpg

    #5190 Reply

    Anonymous
    Guest

    BTW, that’s the aiming beam from a FRVP NDYAG in a cleaned out canal.

    #5230 Reply

    Neat stuff Ron………didnt notice this.

    Hey a question to those of you like Ron and David using scopes. Do you find it beneficial compared to your loupes for the laser, and if you look at the operative site with your loupes and the scope at the same mag, does the light (coaxial shadow free lighting) and the increased diameter of the field of magnification provide you more information with the microscope than the set of loupes.

    I ask because it does seem that more people using lasers are contemplating scopes and I have to present a hands on workshop at the ALD with Scott Benjamin on magnification alternatives and the laser.

    Glenn

Viewing 15 posts - 46 through 60 (of 74 total)
Reply To: Microscope tips.
Your information: