Forum Replies Created
-
AuthorPosts
-
RodSpectatorJanet,
Try Direct List Technology in Anaheim, California. Ask for Catherine Lovell.
Ron,
The videos are done and ready to mail. The packets of info are done. The book is being printed right now, and I hope it will be delivered to me before New Years.
In the mean time, I’ll email you the entire manuscript. Hopefully you’ll receive your book VERY soon in the mail.
MERRY Christmas!! I love this season!
Rod
PatricioSpectatorRod,
Thanks for the information. I will go to school to see what we can do better. At this point we have targeted several areas of up scale homeowners in our communtiy who live in subdivisions. We have sent three separate mailings to each home so far and are evaluating the response before we continue. We were able to pick the streets by driving around and knowing some people who lived in these areas and then somehow we get the names and addresses from the local library at no cost. My staff does this. We have intentionally coupled this with other media exposure in the same time frame. I have your article with the questions to the prospective patients and am planning to use this in some way. I have been surprised at the number of people who find us in the phone book or an ad and follow up by checking out our web site. A good web site is becoming necessary. More and more are downloading the new patient entrance forms and faxing them in ahead of time.
Sorry I will not get to say hello at Dana Point and will miss the Vagas meeting this time.
PatPat
RodSpectatorPat,
Consider this — postage is usually the single most expensive cost of direct mail marketing. By mailing to FULL carrier routes, and especially if you have a CASS certificate, you get your lowest mailing rate — right around Ũ.12 per.
Here’s what I do. I go to my list broker once every two years. We do the demographics while I’m there. We sit down at the computer and bring up a map of my area. My wife (who is my business manager) lays out the border of where we will ‘consider’ marketing to. In other words, she’s learned how far people will actually drive. So once we have established this border, then we bring up the demographics of the carrier routes.
We see the average family income of each carrier route. Then we establish a lower limit, and select all carrier routes that average this and above.
So now we have targeted our list, and we know we’ll get the lowest postage rate.
Then each time I mail, we have our list broker update things for us so that we don’t miss any new building areas.
Make sure you have your OWN bulk rate permit. It only costs 贝 per year. If you use someone else’s bulk rate permit, it’s an open invitation to be scammed.
The sad fact is that many mailing houses will tell you, “Oh, don’t bother getting your own permit — we’re such nice guys, that we’ll let you use ours.” Big mistake!! Many, if not most, of them will really screw you.
For example, you end up paying them to fold, label, sort, bundle, and postage for 20,000 pieces. But what REALLY happens is that they throw 10,000 of your pieces in the trash. They fold, label, sort, bundle, and postage for only 10,000 pieces.
They either then don’t give you a post office postage receipt, or they give you a forged one, OR, they combine your mailing with someone elses, so it looks like you mailed 20,000 pieces, or they combine yours with several others, so you really can’t tell squat.
BUT, if you have your OWN permit, then YOU pay the post office directly, and it goes only on YOUR account for YOUR mailers. This way you KNOW they delivered 20,000 of YOUR mailers, and you don’t get screwed.
Rod
PatricioSpectatorRod,
Thanks, your suggestions should keep me busy for 2003. I will post my experiences.
Pat
whitertthSpectatorJust some routine op. 5.5 watts no anaesthesia….filled with flowable…still used a 4 round buy for the leathery decay just to speed it up and finished with the laser. Patient didnt feel a thing
AnonymousSpectatorQUOTEQuote: from Ron Schalter DDS on 1:37 pm on Dec. 18, 2002
The next to final logo can be seen at the new website I’m developing. I’ll email that to regular posters if they’re interested also.New website and logo are up. I’d appreciate anyone who’s bored and wants to point out misspellings or viewing problems.
p.s. if you’d like your website included on my dental professionals page , drop me an email with details.
Glenn van AsSpectatorGood stuff Ron………..nice work.
How old was the patient ……around 11 or so?
I too use little round burs for caries removal, and then reuse the laser to remove the smear layer prior to etch and bond etc.
Good stuff.
Glenn
Glenn van AsSpectatorHere is a case I did simiilar in nature on a lower third molar . Man it is tough to see these but these retractors from J. Morita help. In addition I really like the pen grasp handpiece from Continuum as the access can be from the occlusal surface coming from the mesial.
With a handpiece or with the traditional handpiece laser the cheek really gets in the way ALOT.
I did this one as well without anesthetic and did the soft tissue as well.
HOpe you like it…………
Glenn
Glenn van AsSpectatorPS that photo collage was only 72 kb and done in Fotoslate with ACDSee. Saved it as a JPEG after it was complete.
Works great to give you one image only………..
Does it look ok to you guys and is this a good way to post a case…….I could actually get 24 pics into one case then if needed (3 photos with 8 photos per case)
Glenn
whitertthSpectatorgreat stuff…nice prep and nice restoration…… while i know some of the differences between the two lasers can u give me a quick rundown about the continuum…. thanks
whitertthSpectatorBTW, patient was 12 years old….
whitertthSpectatorJust some more sharing of some operative dentistry…5.5 watts 90/75 round bur to finish off leathery decay and smear layer removal at 2 watts with 20/ 20 hope u guys like it!
AnonymousSpectatorThere have been many nice images posted to this forum and I was wondering if anyone had suggestions for cameras and accessories. The Sony Mavica I have is pretty limited:)
Looked at the photomed site and wasn’t impressed with any of the sample pix whether full or 1/4 size.
So:
Camera recommendation?
Cost?
Needed accessories?
Where to buy?
Training needed?
Anything else?Thanks
Glenn van AsSpectatorHi Ron: Here are some pics of the Continuum unit.
It is an Erbium Yag at 2940 nm and in addition has 5 pulse rates (Hz) of 3, 10,20, 25 and 30 Hz.
It is a fiber delivery system like Biolase and the fiber is very stable and very durable. It is 80 inches long.
There are two handpieces , a conventional handpiece like Biolase and a pen grasp handpiece which I use with the scope. They make a variety of shapes of tips, including standard 600 and 400 micron diameter quartz tips, endo tips, soft tissue tips, and as far as I am aware sapphire tips for the contra-angle handpiece.
It has a calibration port on the unit which allows for you to check weekly or so how the fiber is and it gives you a digital readout and when it gets to 65% you should replace it. Mine is still at 73% and it started at 80% 3 years ago.
THe water and air controls are just dials not % like the Biolase unit which I dont think is a strength on the continuum unit.
Its around 85 pds and has wheels. It can have either a direct air and water line or water bottle units with distilled water.
The maximum wattage is around 6 watts and the cost is around 39K.
I hope that helps you out somewhat.
Glenn[img]https://www.laserdentistryforum.com/attachments/upload/Resize of Rotation of DSCN2126.JPG[/img]
[img]https://www.laserdentistryforum.com/attachments/upload/Resize of DSCN2124.JPG[/img]
Glenn van AsSpectatorHey I dont like it!
I LOVE IT……….nice work and I would do almost the exact same settings and exact same steps.
Nice stuff…….no anesthetic I guess.
Beautiful result……what did you restore it with.
Can I make one suggestion. Look close at the 2nd molar and you will see scatter and some laser etching of the mesial of that tooth.
My suggestion is to protect the adjacent tooth……..here is a case I did to show you what I mean.
Glenn
Glenn
-
AuthorPosts